What should you do when you find water around an appliance?
Close the valves serving that appliance, unplug it if you can reach the cord without standing in water, and get standing water off the floor. Then photograph the back of the machine and the wet area before anything is moved or dried.
Pull the machine out only if it slides on its feet without force; dragging a full washer across a floating floor adds damage of its own. Lift anything stored on the floor nearby, especially cardboard, which wicks water upward and transfers dye onto flooring. If the room below is finished, look at the ceiling before you decide this is a small job, because that is usually where the evidence of volume is.
Why do small appliance leaks cost more than they look like they should?
Because of where they sit. Water under a toe-kick or beneath an appliance has no air movement and no light, and the materials there are the most absorbent in the room. A cup of water a day in that spot does more damage over a month than a bucket spilled in the open.
Cabinet bases are typically particleboard, which swells irreversibly, and underlayment behaves the same way. That is why a leak measured in teaspoons can end with a run of cabinets partly rebuilt while a larger spill on tile is wiped up and forgotten. The honest way to scope one of these is to pull the appliance, open the toe-kick and take readings, which is the first thing a technician does rather than the last.
Is appliance water clean water?
Supply water from a hose or icemaker line starts clean. Water that has been through a wash cycle or come back up a drain has not. The two are handled differently: the first is mostly a drying job, the second involves removing porous materials and cleaning surfaces.
A crew asks early which it was, because it decides whether carpet pad, cabinet bases and underlayment can be dried in place or have to come out. Clean water does not stay clean either; after a day or two in absorbent material it is treated as the next category up. In a humid subtropical climate a damp cabinet cavity is also a mold risk, as our mold prevention after water damage page sets out.
What makes one appliance job bigger than another?
How long it leaked, whether the water was clean or used, the floor construction, how much cabinetry sits in the wet area, whether a lower level or ceiling was involved, and how many days the readings keep equipment running. A written scope is agreed before work begins.
Duration is the main lever, and it is why a leak discovered by smell usually costs more than one discovered by a bang. Cabinetry is the second: a laundry closet with nothing but a floor is a small scope, while a kitchen run where water has traveled along the toe-kick is a larger one. An upstairs laundry adds the ceiling, the insulation and sometimes the room below. No figures appear on this site for this trade, because a number that was not measured in your kitchen is not a number worth printing; you get a written scope to approve first.
How can a household prevent this one?
Replace tired washer hoses before they fail, close the laundry taps when the machine is not in use, put a shallow pan with a drain under an upstairs washer, and check behind the dishwasher and refrigerator once a season with a torch rather than waiting for a smell.
Braided connectors and a lever valve that shuts both hoses at once are small, cheap changes that take the pressure off the weakest part of the system. A water alarm on the floor behind a washer or under a sink is the other one worth having; they are inexpensive and they catch exactly the slow leaks this page is about. For an upstairs laundry, a drain pan plumbed to a drain line is the difference between a wet floor and a wet ceiling.