What should you do first in a sewage backup?
Stop all water use in the building, keep people and pets out of the affected rooms, and shut off air handling that serves that space. Do not start pulling carpet up. Photograph what you can from the doorway, then call.
If the room has a floor drain, do not pour anything down it to try to clear the blockage. Chemical drain products make the water more dangerous for whoever has to work in it and rarely move a real obstruction. If you have to cross the area, boots and gloves that can be discarded afterward are the minimum, and nothing that was in that water should go back through the house to a bin indoors.
Why can't contaminated water just be dried like clean water?
Drying removes water, not contamination. Porous materials hold residue in their structure after the moisture has gone, which is why carpet, pad, insulation and board that have taken waste water are removed rather than dried, and the hard surfaces beneath them are cleaned before anything is dried.
This is the single most important difference between this page and the rest of this site, and it is where corners get cut. Material that has been saturated with waste water cannot be restored to a safe condition by air movement, and a dried-out carpet that looks fine is still a problem. A crew documents what was removed and why, partly for the insurer and partly so there is a record of how the space was left.
Why do backups show up in lower levels here?
Water takes the lowest opening it can find. In a city built across hills, that is often a finished lower level, a basement bathroom or a utility room floor drain rather than an unfinished space, so the water reaches carpet, drywall and stored belongings first.
That geography is also why these losses are discovered late. A lower-level utility room is not a room most households walk into daily, and the first sign is often a smell upstairs. If your building has a lower-level fixture, knowing where its floor drain is and looking at it after heavy rain is a small habit worth having. What happens when that level floods from outside instead is covered on our basement and lower level flooding page.
What determines the size of a sewage cleanup?
How far the water traveled, how much of the affected area is porous and finished, whether a sanitary line or surface water was involved, access to the space, and how many days of equipment the readings need. The scope is written and approved before any work starts.
A backup into an unfinished utility room with a concrete floor is a comparatively contained job. The same volume into a carpeted lower level with drywall, stored boxes and furniture means most of the contents of the room leave the building, and that is what makes the difference, not the gallons. Access, stair carries and whether the space is a home or a tenanted unit all come into it too. No figures are published here for this trade; what you get is a written scope that lists every item coming out, for your approval first.
Who should you call first, a plumber or a cleanup crew?
If water is still coming in or returns whenever a tap runs, the line needs clearing first, so a plumber. If the backup has stopped and the mess is in the building, call for cleanup. In practice both trades are usually needed within hours of each other.
Doing the cleanup before the blockage is cleared risks doing it twice, which is why a crew asks on the phone whether the water returns when you run water. Our guide on what to do in a sewage backup sets out the order in more detail, including what to keep hold of for an insurance claim. If you are a tenant, tell your landlord or manager in writing straight away, and keep your own photographs.